Nikon COOLPIXP600BK Digital Camera User Manual


 
98
Using the Wi-Fi (Wireless LAN) Function
1 Use the multi selector HI to
select Connect to smart device
and press the k button.
See “Notes About Wi-Fi Connection” (A99)
when Connect to smart device cannot be
selected.
When the Wi-Fi function is turned on, SSID
and password are displayed.
If no connection confirmation is received
from the smart device within 3 minutes, the
message “No access.” is displayed and the
camera returns to the Wi-Fi options screen.
2 Set the Wi-Fi setting on the smart device to On.
Check the user’s manual provided with your smart device for further details.
After the network name (SSID) that can be used for the smart device is
displayed, select the SSID displayed on the camera.
When the message for entering a password is displayed, enter the password
that is displayed on the camera.
When the camera is successfully connected to a Wi-Fi network, the camera
monitor turns off and the power-on lamp turns on.
3 Start the “Wireless Mobile Utility” installed on the smart
device.
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, return to step
1 and retry the procedure.
Connecting the Smart Device to the
Camera
Press the d button M q (Wi-Fi options) tab M k button
Restore default settings
Current settings
Options
Connect to smart device
Wi-Fi options
CancelBack
XXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
SSID:
Password:
Connect to smart device