Nikon COOLPIXS1000PJ Digital Camera User Manual


 
7
Parts of the Camera
Introduction
Replacing the Remote Control Battery
Attaching the Camera Strap
The projector stand can be attached to the camera strap.
B Note on the Projector Stand
Do not carry the camera by the projector stand attached to the camera strap. Should the projector
stand slip off the camera strap, the camera could fall.
123
Push the tab in the
direction indicated
above.
Continue pushing the
tab and pull the battery
holder out as indicated
above.
Remove the used 3V
CR2025 lithium battery.
45
Place a new 3V CR2025
lithium battery in the
battery holder. Be sure
that the “+” mark is
facing up.
Insert the battery holder
into the remote control.
213