Nikon D3000KIT Film Camera User Manual


 
116
Q
Viewing Photographs on TV
An EG-D100 video cable (available separately) can be used to connect the camera to
a television or VCR for playback or recording.
Before connecting the camera, confirm
that the camera video standard (0 127) matches that used in the TV.
1 Turn the camera off.
Always turn the camera off before connecting or disconnecting the video cable.
2 Connect the video cable as shown.
3 Tune the television to the video channel.
4 Turn the camera on and press the K button.
During playback, the camera monitor will turn off and images will be displayed
on the television screen.
Note that the edges of images may not be displayed.
A Video Mode
If no image is displayed, check that camera is correctly connected and that the option
selected for Video mode (0 127) matches the video standard used in the TV.
A Television Playback
Use of an EH-5a AC adapter and EP-5 power connector (available separately) is
recommended for extended playback. When an AC adapter is connected, television
playback will end automatically if no operations are performed for about 30 minutes,
regardless of the options selected for Auto off timers (0 130).
Connect to camera
Connect to video device