Filter
Top Products
322
U
A Virtual Horizon
When Virtual horizon is selected for FUNC. button press, the electronic
analog exposure displays in the viewfinder and control panel act as a
horizontal level when the Fn button is pressed.
Note that the display may not be accurate when the camera is tilted at a
sharp angle forward or back. If the camera is unable to measure the tilt
angle, the display will flash.
e
+NEF (RAW)
*
If image quality is set to JPEG fine, JPEG normal, or
JPEG basic, “RAW” will be displayed in the control
panel and an NEF (RAW) copy will be recorded with
the next picture taken after the Fn button is
pressed. To exit without recording an NEF (RAW)
copy, press the Fn button again.
m
Virtual
horizon
*
The electronic analog exposure displays act as a tilt
meter (pg. 322).
None
(default)
No operation is performed when the Fn button is
pressed.
* This option can not be used in combination with FUNC. button+dials
(pg. 323).
Selecting this options displays a message and sets FUNC.
button+dials to None.
If another option is selected for FUNC.
button+dials while this setting is active, FUNC. button press will be set to
None.
Camera tilted right Camera level Camera tilted left
Control panel
Viewfinder
Option Description