Filter
Top Products
389
n
Remote
terminal
accessories
The D700 is equipped with a ten-
pin remote terminal for remote
control and automatic
photography.
The terminal is
provided with a cap, which protects
the contacts when the terminal is
not in use.
The following
accessories can be used (all lengths are approximate):
Accessory
Description
Remote Cord
MC-22
Remote shutter release with blue, yellow, and black
terminals for connection to a remote shutter-triggering
device, allowing control via sound or electronic signals
(length 1 m/3 ft. 3 in.).
Remote Cord
MC-30
Remote shutter release; can be used to reduce camera
shake or keep the shutter open during a time exposure
(length 80 cm/2 ft. 7 in.).
Remote Cord
MC-36
Remote shutter release; can be used for interval timer
photography or to reduce camera shake or keep the
shutter open during a time exposure.
Equipped with
back-lit control panel, shutter-release lock for use in
bulb photography, and timer that beeps at one-second
intervals (length 85 cm/2 ft. 9 in.).
Extension Cord
MC-21
Can be connected to ML-3 or MC-series 20, 22, 23, 25,
30, or 36.
Only one MC-21 can be used at a time (length
3 m/9 ft. 10 in.).
Connecting Cord
MC-23
Connects two cameras for simultaneous operation
(length 40 cm/1 ft. 4 in.).
Adapter Cord
MC-25
Ten-pin to two-pin adapter cord for connection to
devices with two-pin terminals, including the MW-2
radio control set, MT-2 intervalometer, and ML-2
modulite control set (length 20 cm/8 in.).
GPS Unit
GP-1
(pg. 213)
Record latitude, longitude, altitude, and UTC time with
pictures.
GPS Adapter Cord
MC-35
(pg. 214)
Connects GPS devices to D700 via PC cable supplied by
manufacturer of GPS device (length 35 cm/1 ft. 2 in.).
Modulite Remote
Control Set ML-3
Allows infrared remote control at ranges of up to 8 m
(26 ft.).