Filter
Top Products
431
n
ISO sensitivity
(Recommended Exposure
Index)
ISO 200 – 6400 in steps of
1
/3,
1
/2, or 1 EV.
Can also be set to
approx. 0.3, 0.5, 0.7, or 1 EV (ISO 100 equivalent) below ISO
200 or to approx. 0.3, 0.5, 0.7, 1 EV, or 2 EV (ISO 25600
equivalent) above ISO 6400.
Active D-Lighting Can be selected from Auto, High, Normal, or Low
Focus
Autofocus Nikon Multi-CAM 3500FX autofocus module with TTL
phase detection, fine-tuning, 51 focus points (including 15
cross-type sensors), and AF-assist illuminator (range
approx. 0.5–3 m/1 ft. 8 in.–9 ft. 10 in.)
Detection range –1 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo • Autofocus: Single-servo AF (S); continuous-servo AF (C);
predictive focus tracking automatically activated
according to subject status
• Manual (M): Electronic range finding supported
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, dynamic-area AF, auto-area AF
Focus lock Focus can be locked by pressing shutter-release button
halfway (single-servo AF) or by pressing AE-L/AF-L button
Flash
Built-in flash Manual pop-up with button release and a Guide Number
of 17/56 (m/ft, ISO 200, 20 °C/68 °F; GN at ISO 100 is 12/39)
or 18/59 in manual mode (m/ft, ISO 200, 20 °C/68 °F; GN at
ISO 100 is 13/43)
Exposure