Filter
Top Products
86 Menu Guide
Follow the steps below to take photographs in commander
mode.
1 Adjust settings for the built-in
flash.
Choose the flash control mode and
output level for the built-in flash.
Note that output level can not be
adjusted in –– mode.
2 Adjust settings for group A.
Choose the flash control mode and
output level for the flash units in
group A.
3 Adjust settings for group B.
Choose the flash control mode and
output level for the flash units in
group B.
4 Select the channel.
If the remote flash units include an
SB-500, select channel 3.
5 Press J.