Filter
Top Products
90 Menu Guide
Choose the setting or settings bracketed when auto bracketing
is in effect.
Choose AE & flash (j) to perform both exposure
and flash-level bracketing, AE only (k) to bracket only exposure,
Flash only (l) to perform only flash-level bracketing, WB
bracketing (m) to perform white-balance bracketing, or ADL
bracketing (y) to perform bracketing using Active D-Lighting.
Note that white balance bracketing is not available at image
quality settings of NEF (RAW) or NEF (RAW) + JPEG.
At the default setting of MTR > under > over (H), exposure,
flash, and white balance bracketing are performed in the
following order: the unmodified shot is taken first, followed by
the shot with the lowest value, followed by the shot with the
highest value.
If Under > MTR > over (I) is selected,
shooting will proceed in order from the lowest to the highest
value.
This setting has no effect on ADL bracketing.
e6: Auto Bracketing Set
G button ➜ ACustom Settings menu
e7: Bracketing Order
G button ➜ ACustom Settings menu