Filter
Top Products
137
Technical Notes
Connecting the EH-62A AC Adapter Kit
An optional EH-62A AC adapter kit can be used to provide power from a wall
plug outlet to the Nikon E7900/E5900 when the camera is used for an ex-
tended period, such as connecting it with a computer or printer.
Before connecting the AC adapter kit, turn the camera off and make sure
that the power-on lamp has gone out.
For more information on using EH-62A AC adapter kit, see EH-62A AC adapt-
er manual.
Disconnecting the AC Adapter Kit
Before disconnecting the AC adapter kit, turn the camera off and remove the wall plug
from the power outlet. Open the battery-chamber cover and push upward the battery
latch and remove the EP-62A from the camera.
1
Open the Battery-chamber Cover
and the Power Connector Cover
( ), and then insert the EP-62A
power connector ( ).
Make sure the EP-62A is oriented correctly
and insert it into the battery chamber
pushing aside the orange battery latch.
2
Lock the power connector.
The battery latch will be pushed out of the
way as the EP-62A is inserted; the battery
is fully inserted when the latch locks ( ).
3
Close the Battery-chamber Cover.
Making sure the EP-62A power connector
cord goes through the Power Connector
Cover ( ), close the cover ( ) and slide it
back into place ( ).
EP-62A Power connector
Power connector cord