Filter
Top Products
Advanced Operations
37
2.
Compose the picture, then lightly press the
Shutter Release button.
3.
Check that the orange and green LEDs light up,
then shoot.
Both camera and subject be still
The Red-eye Reduction lamp lights up for approx. a second before the
flash fires. Be careful not to move the camera or let the subject move
until the flash fires.
While the orange LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot be
released. Lightly press the Shutter Release button again, and release
the shutter after the orange LED stops blinking and stays lit.
Red-eye Reduction mode is not automatically canceled by turning the
power off. To cancel the Red-eye Reduction mode, press the
button until “ ” disappears from the LCD panel.
About Red-eye Reduction mode
This mode is not recommended when shooting fast-moving subjects.