Nikon L10 Digital Camera User Manual


 
Connecting to Televisions, Computers, and Printers
64
Connecting the Camera and Printer
1 Set the USB option (c 60) to [PTP].
2 Turn the camera off.
3 Turn the printer on.
Check printer settings.
4 Connect the USB cable as shown below.
5 Turn the camera on.
The PictBridge start-up screen (1) will be dis-
played in the camera monitor. Then the print
selection screen will be displayed (2).
jConnecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented cor-
rectly. Do not use force when connecting the USB cable. When disconnecting
the USB cable, do not pull the connector at an angle.
Do not pinch the connector cover between the camera’s USB connector and
the USB cable connector when connecting the cable to the camera.
USB
PTP
Mass storage
MENU
Exit
PictBridge
MENU
Print selection
w
1
2