Nikon L10 Digital Camera User Manual


 
77
Shooting, Playback, and Setup Menus
f Preset White Balance
Preset white balance is used with mixed lighting or to compensate for
light sources with a strong color cast (for example, to make pictures
taken under a lamp with a red shade look as though they had been
taken under white light).
1 Place white or gray reference object under the lighting
that will be used during shooting.
2 Press the multi selector G or H to
choose [White bal. preset] and press
d.
The camera zooms in.
For information on using the multi selector,
see “Multi Selector” (c 8).
3 Press G or H to choose [Measure].
• To apply the most recently measured value
for preset white balance, choose [Cancel]
and press d.
4 Frame the reference object.
5 Press d.
• The shutter is released and the new white
balance value is set.
No pictures are recorded.
kNotes on Preset White Balance
The camera cannot measure a value for preset white balance when the flash
fires. Regardless of the flash mode selected, the flash will not fire when d is
pressed in step 5.
White balance
Auto
Auto
Daylight
Daylight
Incandescent
Incandescent
Fluorescent
Fluorescent
MENU
Exit
Auto
White bal. preset
Daylight
Incandescent
Fluorescent
G
White bal. preset
MENU
Exit
Cancel
Measure
White bal. preset
MENU
Exit
Cancel
Measure
Reference object frame
White bal. preset
MENU
Exit
Cancel
Measure