Filter
Top Products
Technical Notes
99
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Turn the camera off,
remove the lens cap,
and turn the camera on.
The lens cap may be attached, or a lens error
occurred.
Make sure that the lens cap has been
removed, and turn the camera off and then
on again. If the error persists, contact your
retailer or Nikon-authorized service
representative.
6, 102
Memory card is write
protected.
The write-protect switch is in the “lock”
position. Slide the write-protect switch to the
“write” position.
–
This card cannot be
used.
An error occurred while accessing the
memory card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly
inserted.
7, 113
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for
use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies of
any images, make sure to select No and save
the copies to a computer or other medium
before formatting the memory card. Select
Yes and press the k button to format the
memory card.
97
Out of memory. Delete images or insert a new memory card. 7, 17
Image cannot be saved.
An error occurred while saving the image.
Insert a new memory card or format the
memory card or internal memory.
82
The camera has run out of file numbers.
Insert a new memory card or format the
memory card or internal memory.
82
There is insufficient space to save the copy.
Delete images from the destination.
17