Filter
Top Products
25
Shooting Features
B Pet Portrait Auto Release
• Press the multi selector J (n) to change the Pet portrait auto release setting.
- Y: The camera detects a dog or cat face and automatically releases the shutter.
- k: The camera does not release the shutter automatically, even if a dog or cat
face is detected. Press the shutter-release button.
• Pet portrait auto release is set to k after five bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting. When V Continuous is selected, you can take
pictures continuously while holding down the shutter-release button all the way.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the camera
acquires focus on a face displayed inside a double
border (focus area), the double border changes to
green. If no faces are detected, the camera focuses
on the subject in the center of the frame.
• Under some shooting conditions, the pet face
may not be detected and other subjects may be
displayed inside a border.
o Backlighting
• The flash always fires. Raise the flash before shooting.
O Pet portrait
• When you point the camera at a dog or cat, the camera detects the pet’s face and
focuses on it. By default, the camera detects a dog or cat face and automatically
releases the shutter (pet portrait auto release).
• On the screen displayed when O Pet portrait is selected, select U Single or
V Continuous.
- U Single: The camera captures one image when a dog or cat face is detected.
- V Continuous: The camera captures three images continuously when a dog
or cat face is detected.
15 00
1500
25 m 0s
25m 0s