Filter
Top Products
32
Saving Images to a Computer—Connecting the USB Cable
Connecting the USB Cable
Turn the computer on and wait for the operating system to start up. Turn the MSV-01 off and con-
nect it to your computer as shown below using the provided USB cable UC-E9.
Notes on Connecting to a Computer
• Place the MSV-01 on a flat and stable surface.
• When connecting the MSV-01 to a computer, use the DSA-0151F-05 AC adapter.
• Connect the MSV-01 directly to the computer; do not connect the cable via a USB hub or keyboard.
• When the MSV-01 is connected to a computer, "Connecting via USB" is displayed on the monitor;
all controls are disabled.
• When disconnecting the MSV-01 from a computer, disconnect the USB cable only after completing
the procedure described in "Disconnecting the COOLWALKER MSV-01" ( 34).