Filter
Top Products
About electronic beeper
With the power switch set to
0'1)
,the beeper
is
on. Two types
of
sound are emitted: a
double-beep which indicates
in
-focus
position, and continuous beeping which
is
either an operation signal or an alert.
Double
-
beep
A double-beep
is
emitted when a stationary
subject becomes in-focus
in
the Single
Servo AF mode' .
Continuous
beep
ing
sound
ind
icates:
(As an
op
eration signa
l)
•
Film
rewind
is
complete.
o Self-timer
is
activated (pp. 95-96).
(As an alert signal)
o Possible picture blur due to slow shutter
speed
in
Programmed or Aperture-Priority
Auto exposure mode.
o Possible over- or underexposure (with H :
or t 0 indications)
in
auto exposure
mode'
.
• Lens aperture
is
not set to the
mi
nimum
setting
in
Programmed or Shutter-Priority
auto exposure mode' .
•
Film
reaches the end
of
the roll and
requires rewinding' .
• You have loaded a non-OX film
or
film with
a damaged or unacceptable
OX
code for
auto
OX
setting.
• Camera detects
an
abnormality such as
tom
or damaged film during film advance.
• Vari-Program
is
set with non-CPU lenses.
• Shutter-Priority Auto exposure mode
is
set with Bulb setting.
• Bulb setting
is
selected for Automatic
Exposure Bracketing function
of
MF-26.
• Speed light
is
not set to
TIL
flash mode
with Auto Multi-Program.
•
Sounds
when
the
shutter
release
button
is
lightly
pressed
.
Data
Link
System
users
You can use the
Electronic Organizer
to cancel the double-
beep alert for in-focus
and/or the continuous
beep for picture blur
alert.
The beeper also
comes on when the
camera's computer
memory
is
full
in
the
Memo Holder
function.
For details, refer to
Nikon
AC-1
E card
instruction manual.
15