Nikon Nikon N75 Security Camera User Manual


 
Install
Batteries
and
Check
Battery
Power
Use
two
CR2-type
3V
lithium batteries .
. . . . . . . .
..
. . . . . . . . . . . . . . . .
..
. . . . . . .
...
. . . . . . . . . . . . . . .
1
Turn
the power switch off and open the battery chamber
cover by sliding the battery chamber cover lock release lever
toward indicated direction.
• When replacing batteries, be sure
to
turn the power switch off and replace both
batteries at the same time. Always use fresh batteries of the same brand.
NOTE:
Storing
batteries
Keep the batteries out
of
children's reach. If swallowed, contact a doctor
immediately. (For "Not
es
on
Batteries", see page 116
.)
2
Insert batteries with the
Ee
and e ends positioned as
marked inside the battery chamber, then firmly close the
battery chamber cover.
Make sure to firmly close the battery chamber cover until it locks into place.
Incorrect positioning of
EB
and e poles may damage the camera.
Check
points
We
recommend that you take spare batteries with you, especia
ll
y when travelling .
• For the number of film rolls that can be shot with fresh batteries, see page 128.
16