Filter
Top Products
Auto
Exposure
Bracketing-continued
• If the Exposure Compensation function (page
64)
is also set, bracketing wi
ll
be
combined with the Exposure Compensation values.
It
is
useful to perform
Bracketing with a compensated value of over
+2
EV
or under
-2
EV
(maximum of
±S
EV).
• If the end of the film roll
is
reached during bracketing, the remaining shots can be
taken after new film has been loaded. Also, if you turn the power switch off during
bracketing, the remaining shots can be taken after the power is turned back on.
Electronic analog exposure display
(Example: bracketing value 1.0,
in
A mode)
First shot (correct
EV)
Second shot
(under
EV)
Third shot (over
EV)
3
Auto Exposure Bracketing
is
completed and automatically
canceled when the
th
i
rd
shot is taken.
•
rn:H
and
~
in
the LCD panel and
~
and the electronic analog exposure display
in
the viewfinder disappear when the bracketing is completed.
•
To
cancel the bracketing, rotate the Command Dial while pressing the e button
so
rn:H
disappears from the LCD panel. Turning the power switch off does not
cancel bracketing.
Check
points
• Auto Exposure Bracketing cannot be performed
in
A8 and Vari-Program.
• Auto Exposure Bracketing and Multiple Exposure (page
69)
cannot be set
simultaneously.
• Auto Exposure Bracketing and Long Time exposure (page
62)
cannot be set
simultaneously.
68