NOTE:
CPU
Nikkor
lenses
other
than
G-
type
Always set the aperture ring of a CPU Nikkor lens (except G-type) to its minimum
(largest f-number). When the lens is not set to its minimum aperture setting,
fEE
blinks
in
the LCD panel and viewfinder, and the shutter locks.
2
Set the shutter speed and aperture
while checking the electronic
analog exposure display
in
the
viewfinder.
• Set the shutter speed
(-
- [Time] and 30-1 /2000
sec.) by rotating the Command Dial and
aperture (minimum to maximum) by rotating the
Command Dial while pressing the
@ aperture
button.
• The electronic analog display
in
the viewfinder
indicates the difference between the selected
exposure (shutter speed and aperture) and the
correct exposure. The electronic anal
og
exposure display blinks when the subject
brightness is beyond the camera's exposure
range. (Electronic analog exposure display is not
available with Long Time exposure.)
The following examples show electronic analog
exposure display indications:
3 Compose picture, focus and shoot.
• If the subject is too dark
or
backlit, the flash
recommended indication
~
blinks
in
the
viewfinder when you lightly press the shutter
release button. Use the Speed light (pages
95/107).
61