Nikon P7000 Digital Camera User Manual


 
214
Troubleshooting
Technical Notes and Index
Randomly spaced
bright pixels
(“noise”) appear in
image.
As the subject is dark, shutter speed is too slow or ISO
sensitivity is too high.
Use flash.
Specify a lower ISO sensitivity setting.
Apply Long exposure NR in the shooting menu to suit
situations.
Use a scene mode which has noise reduction.
32
74
103
45
Pictures are too
dark
(underexposed).
Flash is set to W (Off).
Built-in flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Raise the ISO sensitivity.
Subject is backlit. Raise the built-in flash, and set the scene
mode to
Backlighting
or set the flash mode to
X
(fill flash).
On
is selected for
Built-in ND filter
in the setup menu.
32
26
32
43
74
32, 55
184
Pictures are too
bright
(overexposed).
Adjust exposure compensation.
Use
Built-in ND filter
setting in the setup menu.
43
184
Unexpected results
occurred when
flash is set to auto
with red-eye
reduction.
When V (Auto with red-eye reduction) or “fill flash with
slow sync and red-eye reduction” of the Night portrait
scene mode is applied during shooting, In-Camera Red-Eye
Fix may, in very rare cases, be applied to areas not affected by
red-eye. Set a flash mode other than V (Auto with red-eye
reduction), select a scene mode other than Night portrait,
and resume shooting.
32, 49
Skin softening
results are not as
expected.
Skin softening may not produce the desired results
depending on shooting conditions.
For pictures with four or more faces, try using Skin
softening in the playback menu.
36
139
Saving images
takes time.
It may take more time to save images in the following
situations.
When the noise reduction function is in operation
When flash is set to V (Auto with red-eye reduction)
When using scene mode Portrait or Night portrait
while shooting
When using Smile timer while shooting
When using Active D-Lighting while shooting
When Image quality is set to NRW (RAW), NRW
(RAW) + Fine, NRW (RAW) + Normal or NRW
(RAW) + Basic
103
32
48, 49
36
106
68
Cannot set or use
Continuous or
Auto bracketing.
Another function that is set now is restricting the
Continuous setting or Auto bracketing.
108
Problem Cause/Solution
A