Filter
Top Products
216
Troubleshooting
Technical Notes and Index
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm that the operating system used is compatible
with the camera.
•
Computer is not set to launch Nikon Transfer 2 automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
19
24
157
–
156
160
Pictures to be
printed are not
displayed.
• Memory card contains no pictures. Replace memory card.
• Remove memory card to print pictures from internal
memory.
22
22
Cannot select
paper size with
camera.
Paper size cannot be selected from the camera in the
following situations, even for PictBridge compatible printers.
Use the printer to select page size.
• The paper size selected using the camera is not
compatible with the printer.
• A printer that automatically sets the paper size is being
used.
163, 164
–
Problem Cause/Solution
A