Filter
Top Products
114
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
w Electronic VR
Specify the electronic vibration reduction setting for shooting still pictures.
When R is displayed in the monitor with Auto specified, the camera applies
vibration reduction to suit shooting conditions (A 6).
B Notes on Electronic VR
• Electronic VR may not work properly immediately after the camera is turned on or reactivated from
standby mode.
• Electronic VR does not work when the exposure time is faster than a certain value.
• Electronic VR is less effective for when pictures are considerably blurred.
• Blurred subjects cannot be compensated.
• Electronic VR cannot be used together with date imprint (A112). When using date imprint,
setting electronic VR to Auto automatically changes the date imprint setting to Off.
D Electronic Vibration Reduction Icons in Playback Mode
The compensated pictures are marked with the R icon in full-frame playback mode. If electronic VR
cannot compensate a blurred picture, the picture is marked with the Q icon in full-frame playback
mode (A7, 50).
D Compensating Movies with Electronic VR
Electronic VR can be enabled for movie recording from Electronic VR (A63) in the movie menu
(A62).
Auto (default setting)
The effects of camera shake and blurred subjects are reduced while pictures are
shot under the following conditions:
• Flash mode is set to Off or Slow sync
• Shutter speed is slow
• Single is selected for the Continuous setting
Off
Electronic vibration reduction is not enabled.