Filter
Top Products
Configuring the Camera’s Wireless Settings
39
Configuring a Network Profile for a Home Wireless LAN Using
WPS
The network profile for a home wireless LAN can be easily configured if the wireless LAN
access point supports WPS.
WPS supports two configuration methods: Push-Button Configuration (PBC) and
Personal Identification Number (PIN) method.
Configuring a Network Profile Using the PBC Method
1 Choose Network profile from the Wireless
settings option (A 26) in the camera’s setup menu
and press the
k button.
2 Select Push-button WPS and press the k button.
3 Press the WPS button on the access point (wireless
router), then press the k button on the camera.
If the message, Configuration failed. is displayed, begin again
from step 1. If configuration fails repeatedly, configure the
network profile manually (A 28).
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Configure manually
Push-button WPS
PIN-code WPS
Network profile
Press the WPS button on the
wireless router, then press the
OK button on the camera.
Start
Done