Filter
Top Products
52
Appendix
Error Messages
Display Problem Solution
A
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch to
“write” position.
21 of the
User’s Manual
q N
Battery exhausted.
Transfer terminated.
Battery exhausted during
picture upload.
Use the AC Adapter EH-63, or
charge the battery, turn the
camera on again, and apply
the last mode used for picture
upload.
16 of the
User’s Manual
q N
Password incorrect.
Entered password was
not correct.
Enter the correct password.
37
q P
SSID not found
SSID was not detected. • Signal strength may be poor.
Try the following and press
the k button.
- Be sure that your hand is
not obstructing the
camera’s antenna.
- Change the camera’s
direction.
- Move the camera closer to
the access point.
- Remove any obstacles
between the camera’s
antenna and access point.
• When Retry is displayed,
select Retry and press the
k button.
–
q P
Connection error.
Wireless connection to
the SSID was terminated.
Signal strength may be poor.
Try the following and press the
k button.
- Be sure that your hand is not
obstructing the camera’s
antenna.
- Change the camera’s
direction.
- Move the camera closer to
the access point.
- Remove any obstacles
between the camera’s
antenna and access point.
–