Filter
Top Products
69
Connecting to a Printer
Connecting to Televisions, Computers, and Printers
Connecting the Camera and Printer
1 Set the USB option (c 65) to [PTP].
2 Turn off the camera.
3 Turn on the printer.
Check printer settings.
4 Connect the USB cable as shown below.
5 Turn on the camera.
The PictBridge start-up screen will be displayed in the
camera monitor. The camera will then enter full-frame
playback with the PictBridge logo displayed in the top
left corner of the monitor.
USB
Exit
PTP
Mass storage
44 44
ww
MM
v
OK
12