Filter
Top Products
36
EN
Basic photography/frequently-used options
1
Zoom frame AF/zoom AF
You can zoom in on a portion of the frame when adjusting focus. Choosing a
high zoom ratio allows you to use autofocus to focus on a smaller area than is
normally covered by the AF target. Autofocus is also available over a wider area
of the frame than with AF target selection.
250250 F5.6
3030
L
N
0.00.0
01:02:0301:02:03
Shooting display
250250 F5.6
3030
0.00.0
L
N
01:02:0301:02:03
Zoom frame AF
10x10x
Zoom AF
U
U
U
U
U
U
Q
Q
/
/
U
U
(Press and hold)
1
Press the U button to display the zoom frame.
If the camera was focused using autofocus just before the button was pressed,
the zoom frame will be displayed at the current focus position.
Use FGHI to position the zoom frame.
Press INFO and use FG to choose the zoom ratio.
Positioning the zoom frame
Area in which zoom frame
can be positioned
Comparison of AF
and zoom frames
7x
10x
14x
2
Press the U button again to zoom in on the zoom frame.
Use FGHI to position the zoom frame.
Press INFO and use FG to choose the zoom ratio.
3
Press the shutter button halfway to initiate autofocus.
$ Notes
Autofocus is available and pictures can be taken both when the zoom frame is
displayed and when the view through the lens is zoomed in.
At higher zoom ratios, autofocus is more accurate when the view though the lens is
zoomed in.
# Caution
Zoom is visible only in the monitor and has no effect on the resulting photographs.
•
•
•
•
•
•
•
•