Filter
Top Products
45
EN
Basic photography/frequently-used options
1
Setting the image aspect
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures
using live view. Depending on your preference, you can set the aspect ratio to
[4:3] (standard), [16:9], [3:2], or [6:6].
1
Display the live control (P. 20) and select
the aspect ratio item using FG.
2
Use HI to select an aspect ratio and
press Q.
P
4:3
4:3 3:2 6:6
16:9
IS OFF
WBWB
AUTOAUTO
j
# Caution
JPEG images are cropped to the selected aspect ratio; RAW images, however, are
not cropped but are instead saved with information on the selected aspect ratio.
When RAW images are played back, the selected aspect ratio is shown by a frame.
% Tips
For information on cropping existing photographs or changing their aspect ratio, see
“Editing still images” (P. 63).
ISO sensitivity
Increasing ISO sensitivity increases noise (graininess) but allows photographs
to be taken when lighting is poor. The setting recommended in most situations
is [AUTO], which starts at ISO 200 — a value that balances noise and dynamic
range — and then adjusts ISO sensitivity according to shooting conditions.
1
Display the live control (P. 20) and select the ISO sensitivity item
using FG.
2
Select an option using HI and press
Q
.
The selected option is displayed in the monitor.
AUTO
The sensitivity is set automatically
according to the shooting conditions.
200 – 6400 Sensitivity is set to the selected value.
•
P
ISO-AISO-A
200200
1000 F8.0 +2.0
AUTO
200 250 320 400 500
ISO-AISO-A
200200
g
OFF
g
OFF
AUTO
ISO
AUTO
RECOMMEND
% Tips
The default value and upper limit for auto ISO sensitivity can be selected using
[ISO-AUTO SET].
The options available for ISO sensitivity can be selected using [ISO STEP].
Auto sensitivity can be enabled in M mode using [ISO-AUTO].
g “Custom menu” (P. 78)
•
•
•
•