Filter
Top Products
36 EN
Menu operations
Setting an alarm
•
Select [ONE TIME] or [DAILY], and set the alarm time.
•
You can set snooze, alarm sounds and alarm volume.
Operating, shutting off and checking the alarm
•
Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
•
Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note that
pressing
POWER
will turn the camera on.
If [SNOOZE] is set to [OFF], the alarm stops automatically and the camera turns off after 1 minute of no
operation.
•
Checking the alarm settings:
While the camera is off, press
m
to display the current and alarm set times. Times will be
displayed for 3 seconds.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
•
TV video signal types differ by country/region. Check the video signal type before connecting the
camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
TIME Sets the alarm time.
SNOOZE OFF No snooze is set.
ON Alarm is activated every 5 minutes, up to 7
times.
ALARM
SOUND
1 LOW / MID / HIGH
2 LOW / MID / HIGH
3 LOW / MID / HIGH
VIDEO OUT
............................................................... Playing back pictures on a TV
NTSC / PAL
MOVE
ALARM CLOCK
TIME
ALARM SOUND
SNOOZE
09:00
09:00
OK
SET
Connect to the TV's video
input (yellow) and audio
input (white) terminal.
AV cable (Provided)
Connector cover
Multi-Connector
Settings on the TV
Turn the TV on, and set it to video input mode.
•
For details of switching to video input, refer to
your TV’s instruction manual.
•
Images and the information displayed on the
screen may become cropped depending on the
TV's settings.
Settings on the camera
Press the
POWER
in playback mode to turn
the camera on.
•
The last picture taken is displayed on the TV.
Use the arrow pad to select the picture you
want to display.