Filter
Top Products
EN 55
Getting to know your camera better
The flash is activated automatically when there is insufficient light, or when the camera is shaken.
To take pictures with no flash in dark places, set the flash mode to [
$
] and set as follows:
Set the camera to h mode
g
“
h
/
/
<
button Shooting pictures using image stabilizer / Editting images / Printing pictures” (P. 16)
Increase the [ISO] setting
g”ISO Changing the ISO sensitivity” (P. 23)
There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures
• With the digital zoom, part of the image is cropped and enlarged. The greater the
magnification, the grainier the picture appears.
g”DIGITAL ZOOM Zooming in on your subject” (P. 23)
Increasing the ISO sensitivity
• When you increase the [ISO] setting, “noise”, which appears as spots of unwanted color
or unevenness in the color, can be introduced and give the picture a grainy appearance.
This camera is equipped with a function to allow shooting at high sensitivity while
suppressing noise; however, increasing the ISO sensitivity can result in some noise,
depending on the shooting conditions.
g”ISO Changing the ISO sensitivity” (P. 23)
• The reason why there are sometimes differences between the actual colors and the
colors recorded in a picture is related to the light source illuminating the subject. [WB] is
the function that helps the camera determine the true colors. Normally, the [AUTO]
setting provides the optimal white balance, but depending on the subject, results may be
better if you manually adjust the [WB] setting.
• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting, such as when
near a window
• When there is no white in the center of the frame
g“WB Adjusting the color of a picture” (P. 22)
• Take pictures with K in s mode. Suitable for taking pictures on a sunny day at the
beach or in the snow.
g
“
s
(
Scene
) Selecting a scene mode according to the shooting situation” (P. 22)
• Often, bright subjects (such as snow) turn out darker than their natural colors. Adjust [F]
(exposure compensation) toward [+] to make these subjects closer to their true shades.
Conversely, when you are shooting dark subjects, it can be effective to adjust the
exposure compensation toward the [–]. Sometimes, using the flash may not produce the
brightness (exposure) that was intended.
g”1F button Changing picture brightness” (P. 16)
• With [ESP/n] set to [n], the picture can be taken based on the brightness at the
center of the monitor without being affected by the light in the background.
g”ESP/n Changing the area for measuring the brightness of a subject” (P. 23)
Taking stabilized pictures without the flash
The picture is too grainy
Taking pictures with the correct color
Taking pictures of a white beach or snow scene
Taking pictures of a subject against backlight