Filter
Top Products
Button operations
EN
13
Displays the function menu which contains the functions and settings used during shooting.
This button is also used to confirm your selection.
The functions you can set with the function menu
You can switch between P (Program auto) and AUTO (Full auto mode).
Other functions you can set with the function menu
g “WB Adjusting the color of a picture” (P. 21)
“ISO Changing the ISO sensitivity” (P. 21)
“DRIVE Using sequential (continuous) shooting” (P. 21)
“ESP/n Changing the area for measuring the brightness of a subject” (P. 22)
Displays the top menu.
Checking the time
While the camera is off, press m/Y to display the time (and alarm set time when [ALARM
CLOCK] is set). The time will be displayed for 3 seconds.
Hold down m/Y to turn on the LED illuminator.
• The LED illuminator can be turned on even when the camera is
off.
• The LED illuminator automatically turns off after 90 seconds.
• To turn off the LED illuminator, hold down m/Y again, or
perform no operations for 30 seconds and allow it turn off
automatically.
g “LED ILLUMINATOR Setting the LED illuminator function”
(P. 34)
o button (OK/FUNC)
P/AUTO
......................................................................Shooting pictures with automatic settings
P (Program auto) The camera automatically sets the optimum aperture value and shutter
speed for the brightness of the subject.
AUTO (Full auto mode) The camera automatically sets white balance and ISO sensitivity in
addition to the aperture and shutter speed.
m/Y button (MENU/LED illuminator) Displaying the top menu/
Checking the time/Turning on the LED illuminator
m Displaying the top menu/Checking the time
Y Turning on the LED illuminator
6
P
P
P
P
WB
AUTO
ISO
AUTO
o
h
P/AUTO
P/AUTO
ESP
43: Select a setting, and press o.
12: Select the function to be set.
Function menu
7
LED illuminator
d4332_e_0000_7.book Page 13 Tuesday, January 9, 2007 2:07 PM