Filter
Top Products
Menu operations
34
EN
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal
type.
• TV video signal types differ by country/region. Check the video signal type before connecting
the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
When no operation has been performed for approximately 10 seconds while in shooting mode,
the monitor automatically shuts off. Pressing the zoom button or other buttons restores the
camera from power save mode.
This function provides additional lighting when a quick light source is needed and to help you
compose your picture in a dark environment.
g “m/Y button (MENU/LED illuminator) Displaying the top menu/Checking the time/
Turning on the LED illuminator” (P. 13)
VIDEO OUT...................................................................................Playing back pictures on a TV
NTSC / PAL
POWER SAVE..................................................... Setting the camera to the power save mode
OFF /ON
LED ILLUMINATOR........................................................ Setting the LED illuminator function
OFF /ON
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover
Settings on the TV
Turn the TV on, and set it to video input
mode.
• For details of switching to video input,
refer to your TV’s instruction manual.
• Images and the information displayed on
the screen may become cropped
depending on the TV’s settings.
Settings on the camera
Press o to turn the camera on and
press q/P to set the camera to playback
mode.
• The last picture taken is displayed on the
TV. Use the arrow pad 43 to select the
picture you want to display.
d4332_e_0000_7.book Page 34 Tuesday, January 9, 2007 2:07 PM