Filter
Top Products
Menu operations
32
EN
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently. Approximately
once a year is recommended. Wait at least one minute after taking or viewing pictures to allow
the pixel mapping function to perform properly. If you turn the camera off during pixel mapping,
start again.
Select [PIXEL MAPPING]. When [START] is displayed, press o.
The date and time is saved with each image, and is used in the file name.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor at either “minute” or [Y/M/D], press o as the time
signal strikes 00 seconds.
PIXEL MAPPING .....................................................Adjusting the image processing function
s......................................................................................... Adjusting the brightness of monitor
X............................................................................................................Setting the date and time
DUALTIME ......................................................Setting the date and time for another time zone
OFF Switches to the date and time set in [X]. Pictures are recorded with the date and
time set in [X].
ON Switches to the date and time set in [DUALTIME]. When setting the dual time,
select [ON], and then set the time. Pictures are recorded with the date and time set
in [DUALTIME].
OK
SET
MENU
BACK
s
s
s
1: Brightens the monitor. 2: Darkens the monitor.
Press o to confirm your selection.
MENU
CANCEL
X
Y/M/D
Y/M/D
Y M D TIME
Y M D TIME
----.--.-- --:--
----.--.-- --:--
Y-M-D (Year-Month-Day)
Cancels the setting.
Minute
Date formats (Y-M-D, M-D-Y, D-M-Y)
Hour
d4332_e_0000_7.book Page 32 Tuesday, January 9, 2007 2:07 PM