Filter
Top Products
Menu operations
22
EN
You can take a sequence of pictures at one time by holding down the shutter button. The
camera will take pictures continuously until you release the shutter button.
•In [W], the settings change as follows.
• The flash mode is fixed at [$].
• [ISO] is fixed at [AUTO].
• [IMAGE QUALITY] is limited to [2048 × 1536] and lower.
The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 15×)
When activated [ON], the camera will record about 4 seconds of audio after the picture is
taken.
When recording, aim the camera microphone at the source of the sound you want to record.
ESP/n..................................... Changing the area for measuring the brightness of a subject
ESP Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.
n Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.
DIGITAL ZOOM.............................................................................. Zooming in on your subject
OFF /ON
AF MODE.......................................................................................... Changing the focusing area
iESP The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
SPOT Focus selection is based on the subject within the AF target mark.
R...............................................................................................Recording sound with still pictures
OFF /ON
P
[
IN
IN
]
44
[ ]
HQ
HQ
3072
3072
×
2304
2304
P
[
IN
IN
]
44
[ ]
HQ
HQ
3072
3072
×
2304
2304
Zoom bar
White area: The optical zoom area
Red area: The digital zoom area
Optical zoom Digital zoom
d4332_e_0000_7.book Page 22 Tuesday, January 9, 2007 2:07 PM