Filter
Top Products
17
Getting started
Turning the power on/off
When shooting pictures
Power on: Open the lens barrier.
The camera turns on in the shooting mode.
Power off: Close the lens barrier.
The camera turns off.
When playing back pictures on the camera
Power on: Press the (monitor) button with the lens barrier closed.
The camera turns on in the playback mode (the monitor turns
on).
Power off: Press the (monitor) button.
The camera turns off (the monitor turns off).
• If you open the lens barrier without the card inside the camera, NO
CARD appears on the monitor. In this case, you can record pictures
in the camera's internal memory.
• To save battery power, the camera automatically enters the sleep
mode after about 3 minutes of non-operation. If the monitor is on, it
will automatically turn off. The camera activates again as soon as you
lightly press the shutter button or the button. Whenever possible,
turn the camera off when you do not intend to take any pictures for a
while.
Power on Power off
Power on Power off
With the lens
barrier closed