Filter
Top Products
21En
En
PLAYBACK FUNCTIONS
INDEX PLAYBACK
The playback can be changed from the Single-image playback to the Index
playback. This mode is useful when you are looking for a particular image.
1 Close the lens barrier and press the
button.
The monitor turns on in the Play mode and shows the last picture taken.
(Single-image playback).
2 Press the button to display the Index playback.
3 Press the
button to move the green frame to the next image and the
button to move the frame to the previous image.
4 Press the
button.
The monitor goes back to the Single-image playback mode.
CLOSE-UP PLAYBACK
Images can be played back in 4 levels of magnification: 1.5×, 2×, 2.5× and
3×. This function is convenient when you want to check details in the picture
taken.
1 Close the lens barrier and press the
button.
The camera turns on in the Play mode.
2 Press the button.
The image will be magnified in the sequence [1.5×] → [2.0×] → [2.5×] →
[3.0×] each time the
button is pressed.
3 Press the button on the close-up playback screen to enable scroll
mode.
Scroll up, down, left or right using the / / / buttons to display the
area you want to see.
Press the
button again to exit scroll mode.
4 Press the button after exiting scroll mode to return to normal view
(1.0×) of the single-image playback screen.
Note
• Close-up playback is not possible for movies. Select a still picture.
• The menu is not displayed by pressing the button during Close-up
playback. To display the menu, return to normal view (1.0×) of the single-image
playback.
1/Basic05_C2-E.65E 01.8.17, 10:06 AM21