Filter
Top Products
28 En
En
DISPLAYING IMAGE INFORMATION
This function enables you to display or not to display the image information
on the monitor while the image is played back. If you select [ON], the
information is displayed for 3 seconds. For details of the information
displayed, see “Monitor indications” (
).
1 Close the lens barrier and press the
button.
The camera turns on in the Play mode.
2 Press the button.
The monitor shows the Play menu.
3 Select [PLAY] using the / buttons and press the button.
4 Select [INFO] using the
/ buttons and press the button.
5 Select [ON] using the
/ buttons and press the button.
The image information is displayed on the image.
Press the
button again to exit the menu.
Note
• The image information display setting returns to [OFF] (default setting) when
the clear settings value is [RESET] and the camera is turned off. See “Clear
settings” ( p.27).
• Only , and are displayed after 3 seconds, regardless of whether
image information display setting is set to [ON] or [OFF].
MONITOR BRIGHTNESS
If the monitor is hard to see, you can adjust it to suit the surrounding
brightness.
1 Close the lens barrier and press the
button.
The camera turns on in the Play mode.
2 Press the button.
The monitor shows the Play menu.
3 Select [SETUP] using the / buttons and press the button.
4 Select [
] using the / buttons and press the button.
5 Adjust the brightness of the monitor using the
/ buttons and
press the
button.
[+] makes the monitor brighter and [–] makes it darker.
6 Press the button.
The monitor brightness setting is now complete.
Press the
button again to to exit the menu.
Note
The monitor brightness setting remains when the camera is turned off.
1/Basic06_C2-E.65E 8/22/01, 5:46 PM28