Olympus FE-300 Digital Camera User Manual


 
EN
41
Using OLYMPUS Master
Note
If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 38, press Y,
and select [MTP] to use Windows Photo Gallery.
Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
Computers with a USB port added by means of an extension card, etc.
Computers without a factory-installed OS and home-built computers
Please take care that your battery is fully charged!
1 Make sure that your computer is connected to the Internet.
2 Plug the USB cable into the USB port on the computer.
3 Plug the other end of the USB cable into the camera’s USB connector.
The camera turns on automatically.
The monitor turns on and the selection screen for the USB connection is displayed.
4 Select [PC], and press .
5 In the browse window, select “Camera”, then “Update Camera/Add
Display Language”.
The confirmation window for updating is displayed.
6 Click “OK”.
The updating the camera window is displayed.
7 Click “Add Language” in the updating
camera display.
The “Add Display Language of Camera” window
is displayed.
8 Click and select a language.
9 Click “Add”.
The new language is downloaded to your camera.
Please do not remove any cable or the battery while the
camera is processing.
10After the download procedure the camera
display will show “OK”. You can remove the cables and turn power off.
After restarting the camera you will be able to choose the new language
from [SET UP].
To increase the number of languages
d4349_33_e_0000_7.book Page 41 Thursday, June 28, 2007 4:47 PM