Filter
Top Products
Keep your hair, hands, strap, etc. away from
the autofocus window, lens, AE sensor and
flash.
Avoid leaving the camera unused for long
periods of time. This can cause mold to grow
on the camera as well as other problems. Try
to press the shutter release button and check
the operation of the camera before use.
Be careful when moving the camera on a
tripod.
Some airport X-ray machines can damage
the film in your camera. Try to avoid passing
your camera through these machines. Give it
to the security officer for manual inspection.
Do not touch the contact points inside the
camera.
This camera is controlled by a
microcomputer. Problems with the
microcomputer can affect or stop camera
operation, If this happens, remove the
batteries, then reload them and try the
camera again. Strong electrical fields can
also interfere with the operation of this
camera, so try to avoid places or objects that
generate such fields.
This camera is not suitable for use under
severe conditions.
Do not touch the front surface of the flash
after using the flash continuously in a short
time as the flash may be hot.
57