Filter
Top Products
62
Chapter 4
Flash shooting (Cont.)
1
Press the (flash) switch.
● The flash pops up.
2
Press the / (flash mode) button
repeatedly until the desired flash mode
indication appears.
● The flash mode changes as follows (if all
modes are available):
● If / is not pressed within 2 seconds after the selection screen is
displayed, the selection screen disappears.
● To de-activate the flash (Flash Off mode ), push the flash back into the
camera.
3
Press the shutter button halfway.
● When the flash is ready to fire, the
(flash stand-by) mark lights.
4
Press the shutter button all the way.
● The flash fires.
Mode dial
setting
Flash working range
W (max.): Approx. 0.1 m – 5.5 m (0.3 ft – 18 ft)
T (max.): Approx. 1.0 m – 4.5 m (3.2 ft – 15 ft)
Using the flash
P/A/S/M
Auto-flash/ /
No indication
/
//
When selecting/When shooting
Flash mode button
Flash switch