Filter
Top Products
MOTOR DRIVE GROUP UNITS
M.AC Control Box
AC transformer for use with
household current. Incorporates
a selector switch between single-
frame and sequential exposure
operation, a terminal for the re-
lay cord and an intervalomejer.
250 Film Back 1;250 Film
Magazine
Used with the Motor Drive 1 or
Winder 2 for roll films up to
250 exposures. Two Magazines
are necessary.
M. 15V Ni-Cd Charger 1
This AC adapter is necessary to
charge the M. 15V Ni-Cd Control
Pack 1.
Relay Cords 1.2m and 10m
Extension cords between the
Motor Drive 1 and the power
source for remote control.
250 Film Loader
Used in the darkroom for load-
ing the 250 Film Magazine from
33m (100 ft.) bulk film rolls.
Compartment Case L
Partitioned Insert
Can be slung over the shoulder
or carried by hand. If used with
an optionally available partition-
ed insert, the Case L accommo-
dates motor drive equipment.
M. Remote Cords 1.2m/5m
To be fitted into the remote
control jack of the Motor Drive
1 and Winder.
75