Filter
Top Products
MACROPHOTOGRAPHY GROUP UNITS
Macrophoto Stand VST-1
A rugged stand specially design-
ed for close-up and high magni-
fication photography. Usable
with
various
stage
plates.
Com-
plete with a round frosted plate
(black at back) for incident light,
and a pair of stage clips.
Trans-llluminator Base X-DE
Indispensable for holding the
Macrophoto Stand VST-1 for
magnified photographs. Suppli-
ed with a built-in 100V 20W
illuminator with a mirror, and a
pair of wooden handrests for ease
of operation. Can be used with
various stage plates and filters.
Macrophoto Stand B Adapter
For use with the Macrophoto
Stand, to support the Auto Bel-
lows or Focusing Rail on the
Stand.
Macrophoto Stand Extension
Bar VST-E
Extends the height of the Macro-
photo Stand. Length: 7.5cm
(2.95").
When used with the Lieberkuhn
Reflector, it is convenient to re-
place the reflector mirror with
the Centering Mirror PM-ELCS.
Double Cable Release
Attached to the Auto Bellows
and camera shutter release but-
ton, to activate them simultane-
ously.
Cable Release SR-11
Copy Stand
A standard type stand, 48 x 44
cm, for general close-up and copy
photography. Two additional
lights can be attached to the top
of the 80cm high stanchion. Fine
adjustment for the camera height
and a locking device are pro-
vided.
Handy Copy Stand
A four-legged stand for close-up
and copy photography. The leg
length is adjustable to three po-
sitions.
Lighting Set
Complete with two units, each
consisting of a base and light
arm. Max. intensity: 500W.
81