Filter
Top Products
146
Connecting the camera to a computer
9
Connecting the camera to a computer
Connect the camera to the computer using the USB cable provided with
the camera.
1 Make sure the camera is turned
off.
• The monitor is off.
• The lens is retracted.
2 Plug the USB cable into the USB
port on the computer.
• Refer to your computer’s instruction manual to locate the position of the
USB port.
3 Plug the USB cable into the
multi-connector of the camera.
• The camera turns on automatically.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
4 Select [PC], and press Z.
5 The camera is recognized by the
computer.
•Windows
When you connect the camera to your
computer for the first time, the
computer attempts to recognize the
camera. Click “OK” to exit the message
that is displayed. The camera is recognized as a “Removable Disk”.
•Macintosh
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto
application starts automatically, so close this application and start
OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a
computer.
Monitor
Multi-connector
Connector cover
P C
USB
OK
CUSTOM PRINT
EXIT
EASY PRINT
SELECT
GO