Filter
Top Products
Changing the monitor display (y)
75
5
Additional shooting functions
1 Take the picture.
• When recording starts, aim the camera
microphone at the source of the sound
you want to record.
This function displays histograms and lines that help you to compose your
pictures. You can hide the shooting information from being displayed on
the monitor and turn off the monitor.
TIPS
• H is displayed when still pictures with sound are played back. During
playback, sound is output from the speaker. The volume can be adjusted.
g“Setting camera sounds (8/BEEP/SHUTTER SOUND/VOLUME)”
(P. 112)
• Sound can be added later to still pictures. Recorded sound can also be re-
recorded. g“Adding sound to still pictures” (P. 91)
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• Pictures cannot be taken during sound recording.
• Recording sound with still pictures is not available during sequential shooting,
panorama shooting, or timelapse.
• Sound recording may also pick up camera noises, such as button operations,
shutter movement, etc.
• Sound recording may not be possible if there is insufficient space in the internal
memory or the card.
Microphone
Changing the monitor display
(DISP./GUIDE)