Filter
Top Products
Flash shooting
45
3
Basic shooting functions
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when increased
contrast is desired.
Top menu [MODE MENU] [CAMERA] [w]
g“Using the menus” (P. 17)
1 Press sr to adjust the flash
intensity, and press Z.
TIPS
The orange lamp blinks or [BUSY] is displayed.
j The flash is charging. Wait until the orange lamp beside the viewfinder turns
off.
Note
• The flash does not fire in the following situations:
High-speed sequential shooting, auto bracketing, super macro shooting,
and panorama shooting.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
• When a conversion lens is attached to the camera, vignetting may occur with
the built-in flash. To take flash pictures, use an external flash (SP-350).
Flash intensity control
0.0
DIGITAL ZOOM
SET
PIC
CAMERAMEM
SYNCRO
FLASH