Filter
Top Products
25
EN
Shooting mode Option
MAGIC FILTER
1 Pop Art
2 Pin Hole
3 Fish Eye
4 Drawing
*1
5 Soft Focus
6 Punk
7 Sparkle
8 Watercolor
9 Refl ection
0 Miniature
*1
Two images are saved, an unmodifi ed image and an
image to which the effect has been applied.
In
P
mode, the optimum shooting settings are pre-
programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.
The selected effect is applied to the movie. The effect
may not be applied depending on the shooting mode.
Creating panoramic images (p mode)
1
Set the shooting mode to p.
PanoramaPanorama
0.00.0
AUTO
WB
AUTO
WB
AUTOAUTO
14
M
44
MENUMENU
3D3D
N
ORM
2
Press G to go to the submenu.
3
Use HI to select the desired mode. When
selecting [Auto], press G. When selecting
other than [Auto], press the A button.
Submenu 1 Application
Auto
Three frames are taken and combined
by the camera. The user only composes
the shots so that the target marks
and pointers overlap, and the camera
automatically releases the shutter.
Manual
Three frames are taken and combined
by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.
PC
The frames that were taken are
combined into a panorama image using
the PC software.
For details on installing the PC software, see “Setting
up using the supplied CD” (p. 13).
When set to [Auto] or [Manual], [Image Size]
(p. 34) is fi xed to 2MB or equivalent.
The focus, exposure, zoom position (p. 18), and white
balance (p. 29) are locked at the fi rst frame.
The fl ash (p. 19) is fi xed to $ (Flash Off) mode.
Taking pictures with [Auto]
Taking pictures with [Auto]
1 Press the shutter button to take the fi rst frame.
2 Move the camera slightly in the direction of the second
frame.
Target mark
Pointer
Screen when combining images
from left to right
AUTOAUTO
MENU
OK
Save
Cancel