Filter
Top Products
37
EN
Viewing the image immediately after
Viewing the image immediately after
shooting [Rec View]
shooting [Rec View]
J (Shooting menu 2) Rec View
Submenu 2 Application
Off
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
On
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
Automatically rotating images shot with
Automatically rotating images shot with
the camera in a vertical position during
the camera in a vertical position during
playback [Pic Orientation]
playback [Pic Orientation]
J (Shooting menu 2) Pic Orientation
During shooting, the [y] (p. 41) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
Submenu 2 Application
Off
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
On
Information about the vertical/
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
Displaying icon guides [Icon Guide]
Displaying icon guides [Icon Guide]
J (Shooting menu 2) Icon Guide
Submenu 2 Application
Off No icon guide is displayed.
On
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
selected (position the cursor on
the icon for a while to display the
explanation).
Icon guide
14
M
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
Functions can be changed
manually.
Program AutoProgram Auto
PP
MENUMENU
3D3D
N
ORM
Imprinting the date of recording
Imprinting the date of recording
[Date Stamp]
[Date Stamp]
J (Shooting menu 2) Date Stamp
Submenu 2 Application
Off Do not imprint the date.
On
Stamp new photographs with the
date of recording.
When the date and time are not set, [Date Stamp]
cannot be set.
“Date, time, time zone, and language” (p. 15)
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] or [3D]
mode.