Filter
Top Products
Auto Zooming Tracking Dome Camera User Manual
18
ratio label is displayed when zoom is activated.
Azimuth/elevation and direction labels are displayed when
pan/tilt is activated. The dome label is displayed when the dome
label is activated.
The following settings are available foe each label:
OFF: The label is not displayed when activated.
ON: The label shows when activated.
3.4.2 Label Position
Labels can be placed anywhere on the monitor. This feature
enables you to customize the place of labels on monitor screen.
Figure 3.4 Label Position
To set a label position:
(1) Move joystick to position the cursor beside a label.
(2) Press iris Open.
(3) Move joystick to move the label up, down, left, or right.
(4) Press iris Open.
(5) Repeat steps 1 through 4 to position other labels.
(6) Move the cursor to Save and press iris Open to save
settings and return to display setup menu.
ZONE CAMERA PRESET
SAVE
RESET
AZIMUTH
ZOOM