Filter
Top Products
Auto Zooming Tracking Dome Camera User Manual
47
Press Close to discard the setting and return to Fig 3.24
Press Open to save the setting and return to Fig 3.24.
3.6.9 Heater Setting
From the dome setting 2 menu shown in Fig3.17, move
joystick and move cursor to HEATER SETTING, press Open to
enter the following menu (Figure 3.28).
Figure 3.28 HEATER SETTING
HEATER DISPLAY:
Heater display shows heater state.
ON: Screen will display heater state.
OFF: Screen will not display heater state.
HEATER MODE:
Heater mode is to set the heater‟s startup mode.
AUTO: Heater starts when temperature is lower than lower
temperature.
OFF: Heater is closed.
ON: Heater is open.
TEMPERATURE SET:
HEATER SETTING
HEATER DISPLAY ON
HEATER MODE AUTO
TEMPERATUEE SET 33℃
BACK
EXIT