Filter
Top Products
Auto Zooming Tracking Dome Camera User Manual
27
PROPORTIONAL PAN:
Proportional pan automatically reduces or increases the pan
and tilt speeds in proportion to the zooming times. At telephoto
zoom settings, the pan and tilt speeds will be slower for a given
amount of joystick deflection then at wide zoom settings. This
keeps the image from moving too fast on the monitor when there
is a large amount of zoom.
There are two proportional pan modes:
ON (default): Enables the proportional pan mode.
OFF: Disables proportional pan mode. The pan speed will
not depend on the zooming times.
PARK TIME:
This feature enables the dome to operate a specified activity
(scan, preset, or pattern) after a programmed time of idleness.
Park time can be programmed from 1 minute to 720
minutes (12 hours), or set to zero, which disables this feature.
The default setting is zero.
PARK ACTION:
This feature will define the activity when the dome parks.
The following settings are available:
NONE (default): No action.
AUTO SCAN: Dome starts auto scan operation.
RANDOM SCAN: Dome starts frame scan operation.
FRAME SCAN: Dome starts frame scan operation.
PRESET 1: Dome goes to preset 1.
PRESET 8: Dome goes to preset 8.
PANTTERN 1: Dome runs pattern1.
PANTTERN 2: Dome runs pattern2.