Filter
Top Products
Auto Zooming Tracking Dome Camera User Manual
14
manual. Please refer to the installation packet supplied with the
back box for installation instructions.
After installed properly, power up the camera. It will start a
configuration sequence. After the configuration is done, the
monitor will display as below.
PTOL：PELCO-D
COMM：2400,N,8,1
ADDR：0
This information will remain on the monitor until dome
operation begins.
Please refer to the following pages for more about how to
operate and program the camera.
Access main menu (preset 95): Please refer to the
Accessing Main Menu (Preset 95) section.
(1) Move joystick to position the cursor beside menu
selection.
(2) Move the joystick up or down to submenu/cursor
selections.
(3) Press iris Open to confirm selection.
(4) Press iris Close to cancel selection.
(5) Below instructions are based on using control keyboard
as control device.